We have the right equipment to get your job done right.

CNC Machinery

Turning

  • 1 Mazak Quick Turn 20 w/Mazatrol T-Plus conversational control
    • Travel - x 15.7", z 19.7"
    • Rapid Traverse - x 1200 IPM, z 1300 IPM
    • Spindle - 4000 RPM
  • 1 Mazak Quick Turn - 250 w/ Mazatrol 640 fusion conversational control
    • Travel - x 15.7", z 19.7"
    • Rapid Traverse - x 1200 IPM, z 1300 IPM
    • Spindle - 5000 RPM
  • Along with our three jaw chucks, we also have a 5C collet chuck, chuck for S-20 pads, and spindle liners up to 1.75 diameters. With large assortment of S-20 pads, and a complete set of 5C collets, we can bar pull up to 1.75 diameter.
  • 1 CHNC Hardinge W/ Allen Bradley 7300 Series Controls

Milling

  • Mazak VTC-300C machining center w/ Mazak Fusion 640 control w/ fourth axis rotary table.
    • Travel - x 65", y 30", z 28"
    • Rapid Traverse - x 787 IPM, y 1180 IPM, z 1180 IPM
    • Spindle - 10,000 RPM
    • Center dividing plate for multi-tasking
    • 48 tool magazine
  • Mazak VTC-20B machining center w/ Mazatrol M-32B conversational control
    • Travel - x44", y 20", z 20"
    • Rapid Traverse - x, y, -787 IMP, z-590 IPM
    • Spindle - 7000 RPM
  • Mazak VTC-16B machining center w/ Mazatrol T-Plus conversational control w/ fourth axis rotary table

CNC Software

We have the following CNC software:

  • Mazak Camware (Milling Expert)
  • Millwrite (engraving software for CNC machines)
  • Edge Cam software for 3-D milling

Manual Machinery

  • 5 Seiki Mills x 36" y 14" with Newall readouts
  • 3 Bridgeport series I mills
  • 1 Lebond Lathe 15" x 60"
  • 1 Lebond lathe 15 1/2" x 80"
  • 2 Hardinge lathes w/ 8 station turret
  • 1 Hardinge second OP lathe
  • 1 Sunnen hone model #MBB-1290
  • 1 Doall automatic bandsaw
  • 2 Cut off saws
  • 3 horizontal bandsaws
  • 2 vertical bandsaws

Grinding

  • Moore G18 CNC Jig Grinder with Bosch controls
  • Okamoto ACC 12245T Automatic hydraulic surface grinder
    • Coolant system with filter
    • Kametsu electromagnetic chuck
    • Hydraulic over-the-wheel dresser
  • 1 Thompson surface grinder 6" x 18"
  • 1 Hammond surface grinder
  • 2 Matrix O.D. grinders

Inspection Facilities

Our inspection facilities include the following:

  • Brown & Sharp CMM Gage 2000
  • Brown & Sharp 24" Micro-Hite 600
  • Microvu Comparator
  • Mitutoyo Surftest 211
  • 2 Sheffield shadow gages
  • Complete set of gage pins .0110 - 1.0000
  • Sets of Deltronic pins
  • Several sets of gage blocks
  • 1 48x60 surface plate (inspection room)
  • 1 60x96 surface plate
  • 2 24x36 surface plates
  • Many more smaller surface plates throughout the shop
  • Outside and inside micrometers to satisfy any need
  • Verniers up to 40"
  • Large assortment of thread gages

 



Services | Equipment | About Us

Capitol Precision Machine Tool Co.
1865 Radio Rd., Dayton, OH 45431
937-258-1176

Contents of this Web Site Copyright ©2004-15 Capitol Precision Machine Tool Co. All Rights Reserved.

 

Powered by W.I.M.